Products Description
Top Hyflux Uf Membrane Manufacture
Puri-guard® UF membrane is available in many types, here mainly introduce : 8060 and 8080, as well as 2860 and 2880 UF, which are specifically designed to replace DuPont SFD2860 and SFD2880. Not only is the size suitable for replacement, but the performance is also comparable.
The Hyflux UF membrane is widely employed in our current projects and has extensive experience, particularly in the applications of RO pretreatment and wastewater treatment.
Mainly with following characteristics
- High Filtration Efficiency: The membranes are designed to remove suspended solids, colloidal materials, and microorganisms from water, with pore size 0.02um
- Durability: Hyflux UF membranes are with higher production capacity, and high tensile strength fibers and Chemical & oxidation resistance.
- Energy Efficiency: The Hyflux UF membrane because of its much lower pressure operation, make its energy saving.
- Low Fouling and Cleaning Frequency: The material is PVDF which has its feature of resist fouling, which is a common issue in filtration systems, thus reducing the need for frequent cleaning.
- Excellent permeate quality：Low turbidity & low SDI.
- High packing density: More membrane area → smaller footprint
The characteristics of PVDF material
strong resistance to acids and alkalis,
good resistance to chemical oxidation,
strong anti-pollution ability
excellent thermal stability.
main applications
💧Water treatment
Drinking water purification
Surface water treatment
🌊Desalination
RO pretreatment (SWRO / BWRO)
👉 Used in ~40% of SWRO pretreatment projects
🏭 Industrial use
Process water
Boiler feed water
Electronics / pharma water
♻️ Wastewater reuse
Municipal sewage
Industrial wastewater recycling
FAQ
Q: How long i can get the feedback after we sent the enquiry?
A: We will reply you within 12 hours in working day.
Q: Do you deal with urgent orders?
A: Sure. Please contact ASAP for details.
Q: If the products have some quality problem,how will you deal with it?
A: Each step of production and finished products will be inspected by QC department before shipping.If the quality problem of products caused by us, we will provide a replacement service.
Q: How to make payment?
A: T/T,L/C, we also accept most other convenient methods of payment.
Hot Tags: hyflux uf membrane, China hyflux uf membrane manufacturers, suppliers, factory, uf membrane purification unit, pvdf ultrafiltration membrane, uf membrane flux performance, dopunt uf membrane replacement, uf membrane for wastewater, ultrafiltration membrane
Puri-guard® UF membrane water purifier specification
|
Membrane type |
Out-in hollow fiber |
|
Material |
PVDF |
|
Membrane shell |
UPVC |
|
Pore size |
0.02μm |
|
OD/ID diameter |
OD 1.4mm,ID 0.7mm |
|
Tensile strength |
＞110N |
PG-UF-8060-PVDF,PG-UF-8080-PVDF UF membrane component structure
|
Model |
Size |
Active membrane area(sqm) |
weight(wet)(KG) |
|||||
|
Length(mm) |
Space(mm) |
Diameter(mm) |
||||||
|
L |
L1 |
L2 |
d1 |
d2 |
Φ1 |
|||
|
PG-UF-8060-PVDF |
1742.5±3.0 |
1496 |
1622±3.0 |
172.5 |
73 |
225 |
55 |
40 |
|
PG-UF-8080-PVDF |
2242.5±3.0 |
1996 |
2122±3.0 |
172.5 |
73 |
225 |
75 |
50 |
PG-UF-2860-PVDF,PG-UF-2880-PVDF UF membrane component structure
|
Model |
Length (mm) |
space (mm) |
Diameter (mm) |
Active membrane area(sqm) |
Weight (wet) KG |
||||
|
L |
L1 |
L2 |
L3 |
d1 |
d2 |
Φ1 |
|||
|
PG-UF-2860-PVDF |
1860±3 |
1500 |
1630±3 |
1820±3 |
180 |
342 |
225 |
55 |
40 |
|
PG-UF-2880-PVDF |
2360±3 |
2000 |
2130±3 |
2320±3 |
180 |
342 |
225 |
75 |
50 |
UF design:
The general design principle is to first determine the membrane module model based on the water quality of the water source, the effluent requirements, and the application, and then select the preliminary design flux according to the "Membrane Module Recommended Flux Table". Finally, the most reasonable operating flux is determined through pilot test data and actual conditions.
|
Feed water condition |
Suggested design flux(LMH) |
||
|
Resource of feedwater |
turbidity (NTU) |
TOC (mg/L) |
|
|
Groundwater |
<2 |
<1 |
50-100 |
|
Tap water |
<3 |
<2 |
50-75 |
|
Surface water |
2～5 |
<2 |
50-60 |
|
Surface water |
5～15 |
<5 |
40-50 |
|
Seawater |
<5 |
－ |
50-60 |
|
Advanced treated wastewater |
0～5 |
－ |
30-50 |
