Product Description
Top 500 GPD Membrane Manufacture
Puri-guard® 3012 RO membrane high flux 500GPD , this product is generally suitable for the desalination treatment of raw water with a salt content of less than 1000mg/L, with the characteristics of high desalination rate and low operating pressure.
Reliable brand +stable quality
- very stable performance
- Up to -99% rejection based on requirement
- Better consistency for long-term use
- Suitable for vending/commercial machines
- Strong quality using experience in Europe , Middle East, Southasia ,ect
3012-500 Typical Applications
- Water vending machines
- Commercial RO dispensers
- Coffee/restaurant water systems
- Tankless RO systems (high flow use )
our partnerships
Your Pure Trust Supplier Of Puri-guard®
Quality guarantee
Strict quality control and high-reputation membrane sheet selection
- Key part membrane sheet :NSF certified sheet choice
- Performance stability : common reputable stronger products
- life-time: 2-3 years normally
Fast delievry
Fast delivery and small qty support
- We maintain a strong production capacity to catch the orders , total more than 10 domestic membrane lines .
- Standard modles with fast production .
- strong inland logistics cooperation .
fAQ
Q: How much are the shipping costs?
A: Shipping cost is charged by the package's weight and related to the shipping methods youchoose and your destination.
Q: How about quality control?
A: We have a strict quality control system, Professional QC team.
Q: I bought from you once. Can I have a special offer this time?
A: Contact for details. We do value our customers; we can and will offer you good price.
Q: How many days will samples be finished? And how about the mass production?
A: Sample leadtime: usually need 7-10days. Mass production leadtime usually need 30 days
Hot Tags: 500 gpd membrane, China 500 gpd membrane manufacturers, suppliers, factory, ro membrane commercial system, 80 GPD, RO 1812 75, high quality residential ro membrane, High Flow RO Membrane, sanitary reverse osmosis membrane
|
Puri-guard® Element |
Permeate Flow GPD (m3/d) |
Testing Pressure |
Salt Rejection (%) |
|
|
psi/MPa |
||||
|
3012-500 |
500 (1.89) |
100 (0.69) |
97.5 |
|
1. Permeate flow and salt (NaCl) rejection based on the following standard test conditions. 250 ppm softened tap water, 77°F (25°C), pH 7.5, 15% recovery and the specified applied pressure.
2. Minimum salt rejection: 96%.
3. Single membrane element production flow may vary ±20%.
Operating limit
|
Diaphragm type |
Polyamide Composite Membrane |
|
Maximum operating temperature |
113℉ (45℃) |
|
Maximum operating pressure |
150 psi (10 bar) |
|
pH range, continuous operation |
3-10 a |
|
Maximum Influent SDI |
5 |
|
Free chlorine tolerance |
<0.1 ppm b |
a. When pH > 10, the maximum allowable temperature for continuous operation is 95℉ (35℃).
b. Under certain conditions, the presence of free chlorine and other oxidants will lead to premature failure of membranes. Therefore, it is recommended that the membrane be pretreated to remove residual free chlorine before water comes into contact with membranes.
Pls if you have any special requests of 3012 RO membrane, can contact with us anytime, here OEM is also available.
