400 GPD RO Membrane
400 GPD RO Membrane

400 GPD RO Membrane

Puri-guard® 400 gpd RO membrane
Model supply: 3012-400 and 3013-400
This kind of residential membrane normally used in commercial water purifier and direct drinking and home water purifier.
Send Inquiry
Chat Now

Product Description

 

 

Puri-guard® 400 gpd RO membrane have its model 3012-400 and 3013-400, the size is different, due to market different membrane housing. 

The performance can do the OEM based on your requirement on rejection and flow.

image003
How To Choose 3012 Or 3013 Size?

Mainly it is referred to which kind of membrane housing you used! Membrane size and housing size matched then both types all is suitable.

Products Applications

  • Small commercial RO systems
  • Light idnustrial water treatment 
  • Large household 
  • Tankless RO systems 

 

Hot Tags: 400 gpd ro membrane, China 400 gpd ro membrane manufacturers, suppliers, factory, 80 gpd ro membrane, ro membrane filtration system, 500 GPD Membrane, sanitary reverse osmosis membrane, ro filter membrane, B RO Membrane

 

Puri-guard® Element

Permeate Flow

GPD (m3/d)

Testing Pressure

Salt Rejection (%)

psi/MPa

3012-400

400 (1.51)

90 (0.62)

97.5

3013-400

400 (1.51)

90 (0.62)

97.5

 

1. Permeate flow and salt (NaCl) rejection based on the following standard test conditions. 250 ppm softened tap water, 77°F (25°C), pH 7.5, 15% recovery and the specified applied pressure.

2. Minimum salt rejection: 96%.

3. Single membrane element production flow may vary ±20%.

 

Operating limit

 

 

Diaphragm type

Polyamide Composite Membrane

Maximum operating temperature

113℉ (45℃)

Maximum operating pressure

150 psi (10 bar)

pH range, continuous operation

3-10 a

Maximum Influent SDI

5

Free chlorine tolerance

<0.1 ppm b

 

a. When pH > 10, the maximum allowable temperature for continuous operation is 95℉ (35℃).

b. Under certain conditions, the presence of free chlorine and other oxidants will lead to premature failure of membranes. Therefore, it is recommended that the membrane be pretreated to remove residual free chlorine before water comes into contact with membranes.

 

image001

 

Puri-guard® Element

A (±2.0mm)

B (±1.0mm)

C1 (±1.0mm)

C2 (±1.0mm)

D (±0.1mm)

(mm)

(mm)

(mm)

(mm)

(mm)

3012-400

298

76

22

12

17

3013-400

331

68

16

16

17